Scantronic 9751 8 to 24 zone Control panel and Prox Keypad

£162.49 Ex VAT

Model: 9751EN-43
Shipping Weight: 2kgs
Manufactured by: Scantronic

Sold Out

More info about this product

Obsolete

Available while stocks last

Alternative Click Here

Description

The Scantronic 9751 security system, is a fully programmable panel that can protect up to 24 potentially vulnerable areas of a building.

The system has 8 wired zones and can be expanded up to 24 zones using wired or Class VI wirefree expanders operating on 868 MHz narrow band frequency. This ensures flexibility whatever the installation requirement. Wirefree expanders eliminate the need for complex wiring between devices, causing minimum disruption to the décor.

The 9751 is ideally suited to home security or small commercial security applications and has been designed to provide flexibility and ease of use. It has simple A, B and C settings, providing full and part set options. Up to 4 remote keypads can be added to the system, allowing easy operation from any location using either a 4 digit code or encrypted proximity tag.

To reduce maintenance time, the 9751 has upload/download capabilities allowing the installer to program and perform diagnostic tests remotely. As well as the built in modem for communications, the system has secondary outputs to operate other communication devices.

Specifications

General
Product name	9751
Security Grade	BS4737
Sales number	09751UK-50
Product Description	24 Zone Panel plus 99xx keypad

Capacities
Max zones	24
Zones - on board	8 FSL or 8CC (with common tamper)
Zones - on expander(s)	16
Standard wired outputs - on board	3
Communicator outputs:	8
Outputs on expander module(s)	None
Setting Levels:	1 Full + 2 Part (one partition)
Partitions:	None
Log capacity (events):	250
No. Keypads	4
Internal Clock	±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader	Yes
Remote Servicing	Yes

Security
Access code	4 digits
Number of user codes	16 plus installer plus duress
Code blocking	Blocked for 90s after 13 incorrect characters in series.
Proximity tag differs	4,294,967,296

Physical
End Station
End Station dimensions:	245(W), 235(H), 90(D) mm
End Station weight (w/o battery):	2.45 kg
Case material	Steel

Keypad
Keypad name	9941/9943

Environmental
Environmental Grade	Class II
Operating temperature	-10° to +55°C
Humidity	96% RH

Radio
Expander/Built-in:	Expander (see RFX08 or RFX16)

PSTN Communications
Built in Communicator	Yes
Plug on communicator	No
Plug-by communicator	Provides 8 programmable outputs for plug-by module.
Protocols:	Fast Format, SIA, SIA II, SIA III, Contact ID
Speech Dialler	No
ATS rating	2
Line sharing	This product can share a PSTN line with other telephony or fax equipment.
REN	1

Power Supply
EN50131-6 Type	A
Mains power supply	230VAC +10%/-15%, 1A max, 50Hz ±5%
End station psu	13.8VDC, 1.0A
End station consumption	115mA quiescent, 150mA active
Communicator consumption	n/a
Standby Battery	12V rechargeable lead-acid, gel-type battery. Note that a 17Ah battery cannot fit inside the case.
Standby time:	Depends on battery
Max recharge time:	Depends on battery
12V Aux supply (inc LS)	500mA, 12VDC minimum, 13.8VDC maximum, ripple ±2% maximum.
14V4 supply	None
12V Keypad bus	None
Monitoring includes	Mains fail, battery low voltage, battery failure.

Data Connections	None

Wired Outputs
Bell trigger	None
Strobe trigger	None
O/P 1	Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 2	Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 3	Open-collector transistor outputs, 500mA, 12VDC, negative applied.
O/P 4	None
O/P 5-8	None
LS (loudspeaker)	Supports two parallel-connected, externally mounted loudspeakers for internal sounder or EE tones: minimum speaker impedance 16Ω.
Communication outputs	12V logic outputs, negative applied in alarm (positive removed), 50mA maximum.
ST (Siren test)	None

Wired Inputs
TR	Tamper return for Bell
Tellback/Remote reset**	+12V applied to operate reset.
Line Fault input**	+12V applied to indicate line failure.
Aux Tmp	None

Fuses
Mains	T-250mA 250V.
Other	12V Aux = 1A Fast
	Battery = 2A Fast