Risco ShockTec Plus
RISCO’s ShockTec Plus Digital Shock Detector offers reliable 24-hour perimeter protection, ensuring that a break-in is detected as soon as an intruder attempts to force, smash, drill or even saw through a protected window, door, wall or roof.
An advanced digital microprocessor analyses the vibration signal received from the electric sensor and ShockTec Plus incorporates a unique feature – digital sampling of the signal simultaneously in two separate channels which enables precise measurement and analysis of the shock signal. The ShockTec Plus model also has a door/window magnetic contact and a magnetic reed switch for double protection.
Key Features
- Digital microprocessor with intelligent digital signal processing
- Encapsulated bi-morph piezo electronic sensor
- Tri-colour LED enables customized calibration
- Gross attack detection
- Magnetic contact option
- Digital analysis of vibration signals from the electronic sensor enables precise measurement and reliable analysis of the shock signal and consequent threat potential
- False alarm reduction
- Intelligent digital signal processing prevents false alarms owing to naturally caused vibrations
- Tamper proof
- Incorporates technology that prevents tampering through the use of large magnets
Technical Specification
- Supply voltage 9V-16V DC
- Current consumption 7.5mA (typical)
- Operational temperature -20°C to 60°C
- Maximum humidity 95% non-condensing
- Sensitivity setting Dual stage potentiometer
- Tri-colour LED indicator Orange-over-sensitive, green: alarm & correct calibration, red: under-sensitive
- Alarm time 2.5 seconds
- Latching modes Any or first to latch operation modes
- Max mo. of units on any latch loop 80
- Max no of units on 1st to latch loop 10
- False alarm protection Digital microprocessor signal processing and noise reduction with maximum ground plane
- Electrostatic discharge No false alarms up to 8kV
- RF immunity 40 V/m from 80MHz to 1GHz
- Enclosure material Flame retardant ABS
- Enclosure dimensions 25 x 28 x 95mm for detector, 10 x 12 x 58mm for magnet
