The D-TECT 2 IP is an internet protocol connected outdoor detector that combines advanced signal processing and unique optical systems.
The detection beam range can be programmed to 30 metres, avoiding boundary overspill and making it particularly effective for perimeter detection.
Using power over ethernet and IP communication, the D-TECT 2 IP supports direct integration with all major VMS and camera systems, while keeping the installation just as easy as setting up an IP camera.
Features
- Power over Ethernet
- Advanced signal processing, quad pyro & optical systems
- Direct control of IP cameras
- Web browser interface
- Robust IP65 zinc metal housing
- Direct integration with VMS systems
- Ability to monitor a large detection area
- Exceptional resistance to false alarms
- Low maintenance & cost efficient
- Suitable for adverse weather conditions
- Easy to setup and service
- Remote IP setup and diagnostics
Integrations
D-TECT IP enabled sensors seamlessly integrate with advanced security and home automation integrations
- Supported VMS systems / NVR's
- Axis Communications
- Milestone
- Genetec
- Hikvision
- Avigilon
- networkoptix
- Hanwha Techwin
- Dahua
- Concept Pro
- Bosch
- Kentima
- Qulu
- Mirasys
- Griffid
- Wavestore
- SeeTec
- Lilin
- Supported cameras for direct control
- Axis Communications
- Hikvision
- Dahua
- Lilin
- Bosch
- Mobotix
- Sony
- Genie
- ernitec
- Supported home automation software
- Control 4
- RTI
- Lutron
- Crestorn
- Rako
- URC
Technical Specification
| RANGE | Up to 30m programmable |
| COVERAGE | 10º - 70º detection angle, 30m x 30m max |
| ADJUSTMENT | 180º pan + 90º tilt, with visual pan & tilt alignment markers |
| MOUNTING HEIGHT | Optimum 3m |
| FRESNEL LENS | 12 zones for each pyro pair |
| CUSTOMISED OPTICS | Double silicon shielded quad element eliminates 50,000 Lux of white light |
| NETWORK ALARMS | User configurable HTTP web requests, XML and raw TCP socket support. Direct integration for all major VMS software |
| OUTPUTS | 2 x volt-free, silent solid state magnetically immune, programmable trigger options |
| POWER SUPPLY | Power over Ethernet (48V DC) |
| POWER CONSUMPTION | Max 3.8W, PoE class 1 |
| ETHERNET STANDARD | Ethernet IEEE 802.3af, TCP/IP |
| USER INTERFACE | Web browser user interface. No software or installation needed |
| PULSE COUNT | 1,2,3 |
| WALK TEST | Output test mode with LED indication |
| OPERATING TEMP | -20ºC to +55ºC conformally coated electronics for increased stability |
| TEMP. COMPENSATION | Digital sensitivity adjustment |
| TIMER OPTIONS | Up to 120 seconds |
| LIGHT SENSING | Dusk (2 Lux) to 24 hour |
| HOUSING | High impact zinc alloy |
| PROTECTION RATING | Minimum IP65 |
| DIMENSIONS | 145 x 120 x 115mm |
| WEIGHT | 692g |
