Scantronic Control Panel
Obsolete - No longer available
The i-on30EX can be installed to EN50131-1 grade 2 up to 30 zones over 4 partitions and can accommodate 50 users each of which can use a PIN, prox, remote control and PA button to operate the system making it support an incredibly versatile system.
The i-on30EX is a control unit for a hybrid wired/wirefree alarm system intended for commercial or large domestic use.
The control unit comprises a steel case containing the control unit pcb (printed circuit board), power supply and space for a 7Ah backup battery.
The control unit pcb provides terminals for a single bus. The bus allows you to connect up to 10 peripheral devices using standard four wire alarm cable. The peripheral devices can be any mixture of keypads, zone expanders (for wireless or wired detectors) or remote power supplies.
The control unit pcb also provides a range of connectors for outputs, communicators, and up to 10 FSL (Fully Supervised Loop) or five CC (Closed Circuit) zones.
The i-on30EX uses i-kp01 keypads with software revision 2.0 and above. The keypads allow end users to set and unset the system, and the installer to configure the control unit. The keypads also contain integral proximity tag readers, allowing end users to control the system without having to remember access codes.
A range of wireless peripherals is available for operation with the wireless expanders. The range includes a door contact/universal transmitter, a passive infra red detector, smoke detector, external siren, 4 button remote control, and remote radio keypad.
This control unit is designed and approved to be used as part of a Security Grade 2 system.
Key Features
- Choose a panel with or without digi for a cost effective, fully hybrid solution
- Performance bus - fit up to 10 bus devices; expanders, keypads or power supplies
- Semi-Auto Addressing - Prevents address duplication for bus mounted devices, saving hours of installation diagnostic time
- Decimal Expansion - expanders have 10 zones (30 radio zone option available) in addition to the 10 zones on the end station. Zone identification on expanders is now considerably easier
- Audible Bus Device Tracing - locate any bus device quickly and easily; reducing the time taken to complete maintenance and service calls
- Built on the i-on platform with thousands of panels installed
i-on architecture proven in the market with a much larger zone and bus device capacity
