Screw terminal block, no junction box required
Microswitch tamper
Selectable end of line resistor
Can use own resistors
Available in white or brown
Can be fitted in double pole systems
Can be used on double door configuration
This flush mounted magnetic door contact be used in most intruder alarm systems up to and including grade 2 as specificed in EN50131-1:2006 and is certified to EN50131-2-6:2008 and environmental class II (for use indoors) by Kiwa FSS. It operates as a normally closed circuit going open when the magnet housing is moved away from the contact housing. This contact can be used on most doors to detect the unauthorised entry of an intruder. It has 4 terminals to allow for the selection of either double pole or EoL configuration and is suitable for use on double door applications, it is also protected against tampering by lid removal.
| Colour | White |
| Material | HIPS |
| Contact Material | Rhodium |
| Resistor Value | Multi Resistored |
| Commodity Code | 85311030 |
| Country Of Origin | China |
| Height (mm) | 30 |
| Width (mm) | 40 |
| Depth (mm) | 55 |
| Barcode | 5060399126304 |
| Weight (kg) | 0.026 |
| Resistor Type | A, B, D, E & I |
| Flame Retardant | No |
| Type of | Flush |
| EN50131-2-6 Grade | 2 |
| Tamper Protection | Cover |
| EN50130-5 class | Class II |
| IP Rating | 3X |
| Temperature Range | -15°C – +40°C |
| Contact Dimensions (mm) | 33 x 22 x 32 |
| Magnet Dimensions (mm) | 33 x 22 x 32 |
| Connection Type | Terminal |
| No. of Terminals | 4 Screw |
| Contact Type | Normally Closed |
| Mode Of Operation | DP, EOL/FSL |
| Operation Axes (X, Y, Z) | Y, Z, |
| Pull-in gap (X, Y, Z)mm | 15, 9 |
| Pull in Gap | 16mm |
| Suitable for Double Door | Yes |
| No of Reed Switches | 1 |
