The TXF-125E is a battery operated quad photoelectric beam sensor designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations. With 4 selectable frequencies, multiple beam sets can be used in both linear and stacked configurations without risk of crosstalk, further assisted by a transmitter power function that allows the user to set 25/50/75/100m zones.
Two 3.6V (17Ah) batteries can power each unit for approximately 5 years of service, and ±90° horizontal/±20° vertical adjustable optics cater for the most dynamic of terrains.
Click here for batteries
Features
-
4 x synchronised high power beams
-
4 selectable operation ranges 25/50/75/100m
-
4 selectable beam channels to prevent crosstalk
-
up to 5 year battery life using 2 x LS 33600 (3.6V 17Ah) batteries per unit
-
increased beam separation minimises nuisance alarms
-
vivid internal colour aids beam alignment procedure
-
±90° horizontal ±20° vertical adjustable sensor heads
-
environmental monitoring circuit
-
IP65 housing
Specifications
Model |
TXF-125E |
Detection system |
Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) |
Infrared beam |
Single modulation pulsed beam by LED (near infrared beam light-emitting diode) |
Protection distance |
Outdoor 330ft (100m) or less |
Beam power setting |
330ft (100m) / 245ft (75m) / 165ft (50m) / 82ft (25m) |
Max. arrival distance |
10 times (1000m) |
Response time |
0.05 sec, 0.10 sec, 0.25 sec, 0.5 sec |
Battery |
SAFT: LS 33600 (or equivalent) 3.6V, 17Ah |
Battery life |
Transmitter = Up to 5 years* (2 batteries)
Receiver = Up to 5 years* (2 batteries)
*Approximate, not guaranteed |
Beam adjustment |
Horizontal: ±90°, Vertical: ±20° |
Alarm LED |
Red LED (Receiver) ON: when an alarm is initiated |
Attenuation LED |
Red LED (Receiver) ON: when an alarm is initiated |
Ambient temperature range |
-10°C to +50°C (14°F to 122°F) |
Functions |
Modulated beam frequency selection
Tone indicator
Repeat output
Monitor jack
Response time adjustment
Upper/Lower beam switch
Low battery indication
Wireless alignment checker connecting function
Battery saving function
Battery sharing |
IP rating |
IP65 |
Mounting positions |
Outdoor, Indoor |
Weight |
Transmitter: 1.5kg (without batteries), Receiver: 1.5kg (without batteries) |
Appearance |
Cover: PC resin (Wine Red), Base: ASA resin (Black) |