Available while stocks last
Obsolete
Alternative Click Here
Pixim Seawolf 1/3" Digital Pixel Sensor, True Day/Night, Ultra High Resolution 690TVL, 2.8-10.5mm VF Lens, 30pc IR LED's, Mechanical IR Cut-Filter, 3D-DNR WDR, Sens-Up, 12 Zones for Privacy, UTP, RS-485, Fully Cable Managed Bracket, Dual Voltage, IP66, DC12V/AC24V - Black Housing
Model Number |
GB83TSPXIR |
Image Sensor |
1/3 |
Horizontal Resolution (Effective) |
690 TVL (Colour), 800 TVL (Mono) |
Signal Processing |
17-bit Digital Signal Processing |
Transfer Format |
Progressive with Segmented Frames |
Lens |
2.8-10.5mm DC AI Varifocal Lens (F1.2) |
Angle of View |
H : 100.8˚(Wide)~28.5˚(Tele) / V : 73.7˚(Wide)~21.4˚(Tele) |
Sensitivity (F1.2) |
0.1 Lux (Col), 0.01 Lux (Mono) |
Digital Zoom |
4x Zoom |
Effective Pixels (H x V) |
758 x 540 |
Electronic Shutter Speed |
1/50 ~ 1/100,000 Sec |
Scanning System |
2:1 Interlace |
S/N Ratio |
>50dB |
Synchronisation |
INT/LL Selectable |
Frequency |
Horizontal: 15.625KHz Vertical: 50.00Hz |
Video Output |
1.0Vp-p~75Ω |
Day / Night |
EXTERN / COLOUR / BW |
3D-DNR |
OFF / LOW / MIDDLE / HIGH |
Sens-Up |
Auto / Off (Selectable limit x2 ~ x32) |
WDR |
LOW / MIDDLE / HIGH / USER |
O.S.D. |
Yes, Built-in |
Gain Control |
OFF / LOW / MIDDLE / HIGH |
White Balance |
ATW / AWB / INDOOR / OUTDOOR / MANUAL |
Highlight Function |
YES |
Privacy Masking |
On/Off (12 Programmable Zones) |
Motion Detection |
ON / OFF |
Flip |
Horizontal / Vertical |
Communication / Protocol |
RS-485 / Pelco-D |
UTP |
Yes |
IR LEDs & Illumination Distance (850nm) |
30 IR LEDs, Approximately 20 Metres* |
IP Rating |
IP66 |
Operating Conditions |
Temperature: -10°C ~ +50°C, Humidity: 95% RH |
Power Supply |
DC 12V / AC 24V |
Power Consumption |
400mA (AC24V)/ 650mA (DC12V) |
Dimensions (W x D x H) |
90.3 x 130.8 x 245.9 mm |
Weight |
1100g |
Important Note - The Infra-red range assumes ideal conditions |