Takex 1m Reflector Beam System (no reflector req)

£24.41 Ex VAT

Model: PR-1B
Shipping Weight: 0.4kgs
Manufactured by: Takex

Sold Out

More info about this product

Obsolete

Alternative Click Herehttps://www.securitywarehouse.co.uk/catalog/cctv-c-1/detection-c-1_24/takex-5m-reflector-single-beam-system-p-2049.html

Description

The TAKEX indoor Reflector Beam series is designed for applications where a 'beam-break' is desirable, but running wire to both ends in impractical.

The PR-1B is a non-reflector type presence sensor which emits an infra-red beam to a distance of 1m. When the Infra-red beam signal is reflected back to the transceiver (by a passing human or object) a contact output is triggered. The PR-1B is a pocket calculator sized beam designed for unobtrusive protection.

For distances up to 1m (3.3ft) indoor.

note: For correct operation, the sensor should be installed in a position where there is no obstacle within 2m (6.6ft).

Features

Non-reflector type Presence Sensor
Cable only to one end: for applications where a beam break is desirable but wiring to both ends is impractical
Small "pocket-calculator" sized housing for unobtrusive protection

Model	PR-1B
Product type	Photoelectric Beam Sensor
Detection system	Near Infrared (Direct reflective detection of motionless objects)
Protection distance	1m (3.3ft) or less
Response time	100msec. or more
Alarm Output	Dry contact relay output: 1c Contact activation: detection time + off delay (approx. 0.5sec.) Contact capacity: 30V AC/DC, 0.5A or less
Supply voltage	10.5V to 22VDC (non-polarity)
Current consumption	60mA or less (at 12VDC)
Ambient Temperature range	-20°C to +50°C (-4°F to +122°F)
Mounting position	Indoor
Weight	Approx. 75g (2.6oz)
Appearance	ABS Resin (off-white)