Menvier M600KEP Control Panel with MKP3 Keypad

£164.33 Ex VAT

Model: M600KEP
Shipping Weight: 1kgs
Manufactured by: Menvier

Sold Out

More info about this product

Obsolete

Alternative Click Here

The M600 is designed for maximum flexibility and can be operated from anywhere in the property via multiple remote keypads, it can also be programmed to monitor different rooms at different times.

Key features

PD6662 grade 2, once the standard is agreed
Simplified, easy-programmable software
Energy efficient, intelligent power supplies
868MHz narrow-band radio expansion
Programmable zone configurations simplify system takeovers
Backward compatibility with Menvier Networker expansion

Specifications

General
Product name	M600
Security Grade	PD6662: 2004, EN50131-1:2006, TS50131-3:2003, EN50131-6:1997, Grade 1, or 2. DD243:2004.
Sales number	M600KEP
Product Description	40 Zone Grade 2 Panel with comms

Capacities
Max zones	40
Zones - on board	8, CC or FSL
Zones - on expander(s)	32
Standard wired outputs - on board	3
Communicator outputs:	8
Outputs on expander module(s)	None
Setting Levels:	Full set for each ward
Partitions:	4
Log capacity (events):	1000
No. Keypads	16 max
Internal Clock	±10 minutes over one year (depending on the accuracy of the mains supply frequency).
Downloader	Yes
Remote Servicing	None

Security
Access code	4 or 6 digits
Number of user codes	50
Code blocking	Programmable
Proximity tag differs	4,294,967,296
Back tamper (in addition to lid tamper)	Separate terminals

Physical
End Station dimensions:	385(W), 312(H), 95(D) mm
End Station weight (w/o battery):	4.9 Kg
Case material	1.2mm mild steel

Keypad
Keypad name	MKP1, MKP2, MKP3

Environmental
Environmental Grade	Class II
Operating temperature	-10 to 40 C
Humidity	0 to 75% RH, non-condensing.

Radio
Expander/Built-in:	Expander (MRNode)

PSTN Communications
Built in Communicator	Yes
Plug on communicator	No
Plug-by communicator (uses screw terminals)	Yes
Protocols:	Fast Format, SIA, SIA II, SIA III, Extended SIA II, Contact ID
Speech Dialler	No
ATS rating	2
Line sharing	Yes
REN	0.2

Power Supply
EN50131-6 Type	A
Mains power supply	145mA @ 230Vac±10%, 50Hz
End station psu	13.65VDC, 1.25A.
End station consumption	200mA
Communicator consumption	n/a
Standby Battery	12VDC, lead-acid
Max recharge time:	24 hrs max. for 17AH battery
Battery charge limit	750mA
12V Aux supply (inc LS)	Depends on attached peripherals
14V4 supply	None

Data Connections
RS232	No
USB	Yes
Printer	Yes, three pin serial RS232
Ethernet	None
ISDN	None
GSM	None
GPRS	None
Engineer keypad port	Yes

Wired Outputs
Bell trigger	Switched -ve @500mA
Strobe trigger	Switched -ve @500mA
H/0+ (positive holdoff)	Yes
H/0- (negative holdoff)	Yes
O/P 1	1 voltage-free changeover 1A max @ 24Vac or 24Vdc
O/P 2	Switched -ve @500mA
O/P 3	Switched +ve @500mA
O/P 4	n/a
O/P 5-8	n/a
LS (loudspeaker)	16 Ohms
Communication outputs	8. Source 5mA in 12V condition, sink 100mA in 0V condition, selectable output sense
ST (Siren test)	None

Wired Inputs
TR	Yes, -ve
Tellback/Remote reset**	Yes, 0V applied
Line Fault input**	Yes, +12V applied
Aux Tmp	Yes

Fuses
Mains	T315mA 250V 20mm
Other	The panel uses fast-acting polyswitch fuses for overcurrent protection: