ESP Optical Smoke Detector 12V With Relay Base PSD-212

Optical Smoke Detector

12v - No/Nc Relay in Base
The ESP Fireline 12v detector range allows a professional EN grade detectors
to be added to virtually all 12v based intruder alarm systems .

Connected in the same way as a pir or mag contact to either a dedicated fire zone or any other spare zone on the intruder alarm panel the 12v detector will trigger the alarm systems sounders or in some panels a dedicated fire sounder.

In every case the utilized zone should be nominated as 24 hour arming .
Following a fire event the individual detector that has been triggered will latch
and display bi-directional indicators to show the location of the source of trigger .

The range consists of four models, complete with relay base, to provide the perfect detector for varying locations .

Elite Security Products

    Professional grade detectors for use with intruder alarm systems
    Constant 12vDC feed from alarm panel, no requirement for battery changes
    Back up battery supply from panel
    Interchangeable heads . Easy switch after area use changes
    Latching with visual bi-directional indication.
    Low current drain .
    EN-54 approved

    Optical Smoke Detector

•     Type - Conventional
•     Approval - EN54-7
•     Voltage - 9 - 30VDC
•     Standby Current @ 12v < 50µA
•     Alarm Current @12v 29mA
•     Wire Gauge 0.4mm - 2.0mm Twin
•     Operating Temp -10°C to 60°C
•     Test Facility - Simulated Smoke/ Heat
•     Weight - 128g
•     Dimensions - 120(D) x 40mm(H)